Home / Defense & Aerospace

Defense & Aerospace Electronics Manufacturing

Certified precision PCBA and box build for India's defense and aerospace supply chain. ISO 9001 · IATF 16949 · 45,000 sq ft · Bangalore.

45,000 sq ft
Facility, Bangalore
206,700 CPH
SMT Line Capacity
ISO 9001 + IATF 16949
TÜV Rheinland Certified
Since 2013
Defense-Ready Manufacturing
WHY VISHESH FOR DEFENSE

Built to the quality that your supply chain demands

Vishesh is ISO 9001:2015 and IATF 16949:2016 certified by TÜV Rheinland. X-ray BGA inspection, AOI on every SMT line, ERP-tracked batch traceability, IPC-trained operators on the floor. The same quality discipline your end customer demands — delivered by a manufacturer who moves at the speed your project needs.

Full traceability on every batch — component level, operator level, revision level — so your program always has a documented manufacturing record. And when your design changes mid-run, you're not coordinating across three vendors. PCBA, box build, and testing happen under one roof, one quality system, one point of contact. As a certified EMS manufacturer in Bangalore, we are at the heart of India's defense supply chain.

Traceability Built In

ERP-tracked production from incoming inspection to dispatch. Every board, every batch, documented.

X-Ray + AOI Inspection

Unicomp AX-7900 X-ray for BGA and hidden joint verification. Kohyoung AOI on every SMT line.

IPC-Trained Workforce

In-house IPC-certified trainer. Soldering and QC standards enforced at operator level, not just management.

DEFENSE & AEROSPACE APPLICATIONS

What We Build For

If you're building any of the following, Vishesh's facility and certifications make us a qualified manufacturing partner.

defense drone flying in the sky
Drone & UAV Systems

Flight controller boards, ESC assemblies, sensor integration PCBA

military-grade ground vehicle moving through the field
Ground Vehicle Electronics

Ruggedised ECUs, CAN bus boards, driver display assemblies

communication radar being used
Communication Systems

RF sub-assemblies, signal processing boards, antenna feed PCBAs

cctv camera used for surveillance
Surveillance & Sensing

Camera module boards, radar sub-assemblies, edge compute PCBA

airplane cockpit system
Airborne Power Systems

Power conversion boards, BMS assemblies, compact inverter PCBA

INSIDE VISHESH'S FACILITY

Precision Manufacturing Infrastructure

Unicomp AX-7900 X-ray BGA inspection at Vishesh EMS Bangalore
UNICOMP AX-7900 X-RAY — BGA & HIDDEN JOINT VERIFICATION
Kohyoung AOI automated optical inspection at Vishesh EMS
KOHYOUNG AOI — 100% AUTOMATED OPTICAL INSPECTION
Box build and cable harness assembly at Vishesh EMS Plant 2
PLANT 2 — BOX BUILD & CABLE HARNESS ASSEMBLY
ESD-controlled THT assembly with IPC-trained operators at Vishesh EMS
ESD-CONTROLLED THT ASSEMBLY — IPC-TRAINED OPERATORS
TECHNICAL CAPABILITIES

What Vishesh Can Manufacture for Your Program

Capability Detail
Component range0201 to BGA, LGA, CSP — fine pitch 0.3mm
PCB complexityUp to 16-layer boards
SMT capacity206,700 CPH across 3 lines
InspectionAOI (Kohyoung) + X-ray (Unicomp AX-7900)
Through-holeWave soldering, 6,000 boards/day
Special processesSelective conformal coating, ultrasonic welding
Box buildComplete mechanical assembly, Plant 2 (20,000 sq ft)
TraceabilityERP-tracked, batch-level documentation
Quality certificationsISO 9001:2015 + IATF 16949:2016 (TÜV Rheinland)

Vishesh's Plant 1 handles all PCBA and testing. Plant 2 handles mechanical assembly and box build. Both are located at NICE Road junction, Gottigere, Bangalore — a single address, single quality system, single point of accountability.

Currently pursuing additional defense-sector certification. Team backgrounds include OEM experience at Schneider Electric, Honeywell, Motorola, and BPL. For a full picture of Vishesh's electronics manufacturing services, visit our services overview.

Vishesh facility exterior — NICE Road junction, Bangalore
Vishesh FACILITY — NICE ROAD JUNCTION, BANGALORE
COMPLIANCE & QUALITY

Certified to the Standards That Defense Programs Demand

ISO 9001:2015

Quality Management System

Certified by TÜV Rheinland. Valid to November 2028. Covers full manufacturing and testing operations at Vishesh's Bangalore facility.

IATF 16949:2016

Automotive Quality — Defense Discipline

The same quality management standard demanded by Tier-1 automotive OEMs. Process control, FMEA, APQP discipline applied to every production run.

In Progress

Defense-Sector Certification

Vishesh is actively pursuing additional defense-sector certification. Speak to us about your program's compliance requirements.

Frequently Asked Questions

Are there ISO-certified EMS manufacturers in India that supply to defense Tier-1 contractors?

Yes. Vishesh is ISO 9001:2015 and IATF 16949:2016 certified by TÜV Rheinland — certifications that meet the quality management requirements of India's defense Tier-1 supply chain. We manufacture PCBA and box build assemblies for defense and aerospace programs as a sub-assembly partner to prime contractors.

What's the difference between commercial PCBA and defense-grade electronics manufacturing?

Defense-grade manufacturing is defined by traceability, process control, and inspection rigour — not just component specification. At Vishesh, every production batch is ERP-tracked from incoming inspection to dispatch, every board goes through 100% AOI and X-ray verification for BGA joints, and assembly is performed by IPC-certified trained operators. That's the discipline defense programs require — and it's built into our standard process, not offered as an upgrade.

Which Indian EMS companies handle low-volume high-mix defense electronics manufacturing?

Vishesh operates a dedicated small-batch line alongside main production, supporting runs from 10 to 500 units per batch at high complexity. This is the typical volume profile of defense development programs and limited-series production. Our Siemens SMT equipment handles fine-pitch BGA, LGA, and CSP components — the complexity range common in defense sub-assemblies.

Can a private EMS company in India manufacture electronics for defense programs without being a DRDO-registered vendor?

Yes, at the sub-assembly level. DRDO registration and defense vendor approval is typically required at the Tier-1 prime contractor level — the company holding the main program contract. Tier-2 sub-assembly manufacturers like Vishesh supply certified PCBA and box build to those prime contractors. If your program has specific vendor registration requirements at sub-assembly level, contact us directly.

What should I look for when choosing an EMS partner for a defense electronics program in India?

Four things matter most: certification (ISO 9001 minimum, IATF 16949 preferred), inspection capability (AOI and X-ray are non-negotiable for BGA-heavy boards), traceability systems (ERP-tracked batch documentation), and single-source accountability (PCBA and box build under one roof avoids inter-vendor quality gaps). Vishesh meets all four from its Bangalore facility.

START A CONVERSATION

Working on a defense or aerospace program?

Tell us what you're building. We'll tell you whether Vishesh is the right manufacturing partner — and if we're not, we'll say so.

Response within 1 business day
NDA available on request
Bangalore facility visit welcome